Introducing the latest evolution in small wind turbines. The AIR-X builds upon what made AIR the world's #1 selling small wind turbine with new technology previously found only in today's state-of-the-art mega-watt-class wind turbines.
All of these features are primarily found within the body of the turbine. The new microprocessor based speed control results in increased performance, improved battery charging capability and the reduction of “flutter” noise from the machine. The controller allows for peak-power tracking of the wind by optimizing the alternator's output on all points of the cubic curve and then efficiently delivers the energy to the battery. The turbine’s smart controller allows it to actually control blade rotation speed thus eliminating the buzzing noise commonly found with the AIR 403 and 303 in high winds. Furthermore, a new series of carbon-reinforced blades with a modified pitch angle further increases power production.

Much Lower Noise: Previous AIR wind modules relied on their aero-elastic blade design for protection in high winds, causing loud flutter noise in winds above 35 mph (16 m/s). AIR-X’s circuit monitors the wind speed and electronically slows the blades as it reaches its rated output preventing it from going into flutter. This results in a much quieter wind turbine. In high winds, the AIR-X will continue to produce power at a reduced level until the wind decreases, at which point maximum output will resume. The Benefit: Quieter and neighbor friendly operation.

Improved battery charging: Previous AIR designs required 300-400 amp hour battery banks so the trickle charge of the wind turbine could be adequately absorbed. The AIR-X’s charge controller periodically stops charging, reads the battery voltage, compares it to the voltage setting and if the battery is charged, it completely shuts off all current going to the battery. This function is performed within a few milliseconds. The closer the battery is to reaching its full state of charge, the more often the AIR-X’s circuit repeats this action. This means any size battery bank from 25 to 25,000 amp hours or higher can be charged safely. When the battery has reached its charged state, the AIR-X will slow to an almost complete stop. Only when the battery has dropped below its voltage set point will it startup and resume charging. The Benefit: Extended battery life, no overcharging.

Lower stress design: AIR-X limits power on the input side of the electronics by controlling the torque from the blades. The power no longer has to be dissipated by the electronics resulting in lower stress on the circuit, bearings and other materials. Furthermore, stress on wind turbines occurs primarily in high winds. Under these conditions, the electronic stall design reduces the blade speed to 600 rpm, thereby significantly reducing turbine and tower loading while still producing power. The Benefit: Greater confidence in turbine operation in high wind conditions without manually operating the stop switch. Note: A manual stop switch control is an available option for the AIR-X.

 

BATTERIES	CABLES	CHARGE CONTROLLERS
DC DISCONNECTS & BREAKERS	ENERGY SAVING APPLIANCES	FUSE BLOCKS & LIGHTNING ARRESTORS
GENERATORS	INDIVIDUAL SOLAR CELLS	INVERTERS
INVERTER ACCESSORIES	METERS & REMOTE CONTROLS	MISCELLANEOUS
SOLAR POWER KITS	SOLAR PANELS	SOLAR PANEL MOUNTS
SOLAR POWERED COOLERS	SOLAR POWERED WATER PUMPS	TRACKERS
	WIND POWER

 RETURN TO INDEX

 

  

 

 

A Whole New Way To Do Business Is Just A Click Away !



 

We Supply All Of The Following Fine Product Lines !

Matrix Solar
Xantrex Technology
Kyocera Solar
Unirac
Outback Power
BZ products
Trojan Battery
Fronius
BP Solar
Sundanzer
Staber
Unisolar
Dankoff Pumps
Evergreen Solar
Solar Chill
Sanyo Solar
SMA America
Sharp Solar
And Much More !

Sales And Support

We maintain one of the nation's only multi-brand factory authorized service centers, which means that we can offers you the competitive edge when it comes down to servicing your customers.