The
OutBack MX60 Maximum Power Point Tracking (MPPT) charge controller enables your
PV system to achieve its highest possible performance. Rated for up to 60 amps
of DC output current, the OutBack MX60 can be used with battery systems from 12
to 60 VDC with PV open circuit voltage as high as 125 VDC. The MX60's set points
are fully adjustable to allow use with virtually any battery type, chemistry and
charging profile.
The
OutBack MX60 allows you to use a higher output voltage PV array with a lower
voltage battery - such as charging a 24 VDC battery with a 48 VDC PV array. This
reduces wire size and power loss from the PV array to the battery/inverter
location and can maximize the performance of your PV system.
The
OutBack MX60 comes standard with an easy to use and understand
display of the PV system’s performance. The four line, 80 character, backlit
LCD display is also used for programming and monitoring of the system’s
operation.
The
OutBack MX60 can also be connected to the OutBack MATE system controller and
display to allow monitoring of up to eight MX60 controllers from a distant
location - up to 300 feet away. The MATE also includes an opto-isolated RS232
port for connection to a PC computer for data logging and system monitoring.
CLICK HERE TO VISIT OUR NEW OUTBACK
PRODUCTS WEBSITE
FOR DOWN UNDER PRICING AND OUT OF THE WORLD SERVICE AND SUPPORT !
SPECIFICATIONS
MX60
Output
Current Rating 60 amps DC Maximum at 12, 24 or 48 VDC
Nominal
Battery Voltage 12, 24, 32, 36, 48, 54 or 60 VDC (programmable)
PV
Open Circuit Voltage 125 VDC Maximum
Standby
Power Consumption Less than 1 watt typical
Charging
Regulation Methods Five Stage: Bulk, Absorption, Float, Silent, Equalization
Voltage
Regulation Set points 13 - 80 VDC
Equalization
Voltage Adjustable 1.0 to 5.0 VDC above Bulk Set point
Temperature
Compensation Programmable slope -2.0mV/o C/Cell to -5.0mV/o C/Cell
Voltage
Step-Down Capability Can charge a 12 or 24 VDC battery from a 48V nominal PV
array
Power
Conversion Efficiency 99.1% @ 40 amps Output 97.3% @ 60 amps Output
Digital
Display 4 line 80 character backlit LCD Display
Remote
Interface RJ 45 Modular Connector CAT 5 Cable 8 wire
Operating
Temperature Range -40 to 60 o C Power de-rated above 25 o C
Environmental
Rating Indoor Type 1
Conduit
Knockouts Two 3/4 - 1” on the back; One 1” - 1 1/2 “ on each side; Two
1” - 1 1/2” on the bottom
Warranty
Two years parts and labor Optional Extended Warranty
Dimensions
Enclosure: 14.5 “ H x 5.75” W x 5.75” D Shipping box: 17.75” H x 10” W
x 7” D
Shipping
Weight 12 lbs. - 5.4 kg
CLICK HERE TO VISIT OUR NEW OUTBACK
PRODUCTS WEBSITE
FOR DOWN UNDER PRICING AND OUT OF THE WORLD SERVICE AND SUPPORT !
List
Price $649.00
ATTENTION
!
Advantage
Solar Inc. is a wholesale distributor of renewable energy products and sells
only to authorized dealers.
The prices posted on this website are manufacturer's suggested retail prices
and are for reference only. Dealer pricing is of course considerably lower.
If you are
an end user and would like to purchase product, please give us a call and we
will refer you to your nearest Advantage Solar authorized dealer or
installer.
Please click on the following link to learn
more about our authorized dealer program or give us a call at 1-866-523-4948
Dealer Information
Page
